Airforce One® Blue Filter Cleaning & Oiling Kit:

AF1 PN#: 17000

Filter Cleaning Instructions:

The general method for cleaning your AIRFORCE ONE Performance Filter will be to carefully remove the filter from your intake system and to apply the cleaning emulsifier by spraying the entire filter allowing it to soak in for a few minutes. Next, simply hose off the filter, washing away the dirt build-up and shaking the excess water from the filter. If the filter is heavily soiled, you may decide to give it a second cleaning. (Note: the color of the filter membrane will retain the color of the oil used due to the dye in the oil. If an oil color change is desired, it will take several cleanings!) Allow the filter to dry by placing it in the sun or a warm environment.

"Do Not Use Compressed Air" to blow dry your filter.

The filtering element is a seven layer membrane and compressed air used to remove the excess water can rupture the element and void your warranty! After drying, apply the oil sparingly either by spray or pump bottle, allowing the oil to "wick" through the filter element. A light even coating is all that is needed. Do not try to paint the deep rich color into the filter. Place the filter on several layers of newspaper, (standing on end) to allow any excess oil to "wick" onto the paper for several hours. Wipe off the over spray from the mounting flange and the end ring. Then reinstall your filter. You're done and ready to go again for at least 10,000 more miles. **If used off-road, clean as needed.